The U-shaped channel cast-in-place molding machine is especially suitable for the prefabricated U-shaped groove irrigation channel reconstruction project
The U-shaped channel cast-in-place molding machine is especially suitable for the prefabricated U-shaped groove irrigation channel reconstruction project
Equipment Application:
It is widely used in the concrete lining of various channels such as farmland water conservancy, land improvement, highway ditch drainage, railway ditch drainage, and urban ditch drainage. Channel shapes vary in different occasions. Common channel types are: U-shaped, ladder-shaped, rectangular or V-shaped.
What are the advantages of U-shaped channels?
U-shaped channels are more economical. The analysis and comparison of U-shaped canal, trapezoidal canal and rectangular canal lining engineering volume. Under the same flow, gradient and roughness conditions, U-shaped canal saves lining engineering volume than trapezoidal canal and rectangular canal.
if you have project that need our machine ,please contact us ,we will give you the design for your project .
Hydraulic System | Oil Pump Motor | customizable |
Reset Pressure | 16Mpa | |
Flow | 7L/min | |
Oil Volume | 120L | |
Generator System | Generator | customizable |
Model | Changchai | |
Motor | customizable | |
Speed | 2300r/min | |
Moulding System | Discharge motor | customizable |
Vibrator motor | customizable | |
Walking speed | 3m-4m/min | |
Bucket | customizable | |
Concrete slump | <100mm | |
Construction requirements | Longitudinal slope requirements | <30° |
Cross slope requirements | <5° | |
Degree of turn | 120° | |
Forming standards | Flatness of ditch bottom | Soil ±15mm |
Stone ±30mm | ||
Width | ±20mmmm | |
Depth | ±30mm | |
Thickness | ±10% | |
Size | Customizable | |
Weight | Customizable |